Skip to main content

Update Controller Firmware

Update Controller Firmware

Back to Help Center
  • Open the app that your controller can communicate with
    • If the code on your controller screen is 18R13 your controller can only communicate to the JellyFishP2 app
    • If the code on your controller screen is 020___ right now it is 020102 your controller can only communicate to the JellyFish Designer app
  • FOLLOW INSTRUCTIONS BELOW FOR THE APP YOU ARE USING:

 

  • JELLYFISH DESIGNER APP INSTRUCTIONS TO UPDATE FIRMWARE
  • Open the JellyFish Designer App
  • Press the “Setup” tab on the bottom of the screen
  • Make sure you are in the general tab
  • Press “Update Controller Firmware”
  • Click the box of the controller you want to update
  • Press “Start Update”
  • Updates take 3-5 minutes

 

  • JELLYFISHP2 APP INSTRUCTIONS TO UPDATE FIRMWARE
  • Open the JellyFishP2 app
  • Click  “Settings”
  • Click  ”Controller Settings”
    • If “Controller Settings” button is not there, then you need to connect to controller WiFi
  • Click ”Update Firmware”
    • Wait until the controller is updated, this will take a few minutes